Information T5000 3-PANEL 3 TRACK GUIDE

This T5000 roof system is designed for smaller projection roofs. By using the 3 track series, the system can open up to 66% (2/3rds). It is mostly used for projections up to 3m only. At the push of a button, simply open or close the roof depending on the conditions. Or have a rain sensor fitted to close the roof even when you are not there.

All systems work on a 6 degree fall, which equates to a drop of 102mm per 1m. The roofs can be mounted off walls or above roof lines by using specially mounted extenda brackets. The advantage of the extenda brackets is the top panel which is fixed would be above the roof, allowing a 100% opening from the house.

The panels used are 16mm Triple Wall polycarbonate. This material is extremely strong but lightweight leaving less strain on the motor. Available in Clear and Opal, the material has incredible spans allowing minimal rafters.

We use F.A.A.C motors, from Italy. These tubular motors are radio controlled. The motor can simply be plugged into a socket without the need for hard wiring. They are extremely reliable.

The system is supplied with fully mounted panels, guides with fastening supports, and a ready-mounted motor.All panels in this system fit between the rafters. The top panel is always fixed to conceal the motor.
 

Series	Maximum Rafter Span	Maximum Panel Size	Maximum Post spacing.
3 panel 3 track	3m	2.5m	4.8m

Motor Size	40nb
Rafter Size	143mm
Frame Colours	Any powdercoat colours
Sheet Colour	Clear or Ice
Post Size	100mm x 100mm
Fall	6 deg (102mm per 1m)

All systems are designed and engineered to the latest Australian Standards for structural/wind loading systems. AS1171.2. For any council applications, fully engineered plans can be obtained by us or our distributors.